110 Inch Interactive Flat Panel for Large Venues & Lecture Halls
A 110-inch 4K UHD interactive display with a built-in 48 MP camera and 8-array microphone, 20-point infrared touch, Android 14 and an OPS slot for Windows — engineered for large lecture halls, auditoriums and big boardrooms where a separate conference camera is no longer needed.
The flagship display for large rooms
The T-IFP-110 is a 110-inch interactive flat panel built for the largest spaces in a deployment — lecture halls, auditoriums, multipurpose halls and large boardrooms. Its 4K UHD DLED panel runs at a smooth 4K @ 60Hz with 450 nits brightness, a 5000:1 contrast ratio and a 178° viewing angle behind 4 mm tempered anti-glare glass, so a 2435 mm-wide image stays crisp from the very back of the room.
What sets this model apart is what's already inside it: a built-in 48 MP camera and an 8-array microphone. In most large rooms that removes the need for a separate conference camera (T-VID-CAM) in the bill of materials — one wall, one product, fewer cables. It ships with Android 14 on an octa-core Amlogic A311D2 processor (8 GB / 128 GB) and a standard OPS slot, so a T-CPU-i5 or i7 OPS module adds Windows 10/11 alongside Android with seamless touch switching.
Every unit is CE, FCC and RoHS certified, carries a 2-year warranty, and is available for OEM customisation — your logo, boot screen, launcher and pre-installed software — from a minimum of 10 units.
-
Built-in 48 MP camera + 8-mic array
Conferencing-ready out of the box — typically removes the need for a separate PTZ camera, even in large rooms. -
110″ 4K UHD at 60Hz
3840 × 2160 on a DLED panel, 450 nits, 5000:1 contrast, 16.7M colours — smooth motion at 4K 60Hz. -
20-point infrared touch
≤1 mm accuracy, driver-free, write with finger or stylus; 32767 × 32767 touch resolution. -
Android 14 + optional Windows
Octa-core Amlogic A311D2, 8 GB / 128 GB; OPS slot adds Windows 10/11 with seamless touch switching. -
Built-in wireless screen sharing
Cast from Windows, macOS, Android and iOS — no dongle required for standard BYOD. -
Whiteboard, annotation & cast built in
Annotate over any source in Android or Windows; side-swipe navigation for quick tools. -
Premium aluminium build
Sandblasted anodised aluminium frame, dual anti-glare tempered glass, zero-bonding low-parallax touch, passive cooling. -
CE · FCC · RoHS · 2-year warranty
Factory three-stage QC; 50,000-hour panel life; ≤0.5 W standby power.
Full technical specifications
| Panel size | 110 inch (16:9) |
|---|---|
| Active display area | 2435.4 × 1369.5 mm |
| Resolution | 3840 × 2160 (4K UHD) |
| Refresh rate | 4K @ 60 Hz |
| Panel / backlight | Brand-new HD LED, DLED direct backlight |
| Brightness | 450 cd/m² (450 nits) |
| Contrast ratio | 5000:1 |
| Viewing angle | 178° (H) / 178° (V) |
| Colour depth | 16.7M colours |
| Response time | 8 ms |
| Surface glass | 4 mm fully tempered, dual anti-glare / anti-shatter glass |
| Touch technology | 20-point infrared touch |
| Touch accuracy | ≤1 mm (±1 mm over 90% of the touch area) |
| Writing input | Finger, stylus, or non-transparent object ≥2 mm |
| Touch resolution | 32767 × 32767 |
| Cursor speed | 120 points/s |
| System response | ≤15 ms, driver-free (plug & play) |
| Panel lifespan | ≥50,000 hours |
| Operating system | Android 14 (optional Windows 10/11 via OPS module) |
|---|---|
| Processor | Amlogic A311D2, octa-core (4× Cortex-A73 + 4× Cortex-A53) |
| RAM | 8 GB DDR4 |
| Storage | 128 GB |
| Built-in camera | 48 MP (4800-megapixel-class) front camera |
| Microphone | Built-in 8-array microphone |
| Speakers | 2 × 15 W front-firing, 3D stereo (background / preview use) |
| Audio output type | Line-level — connect T-AUD-ACT active speaker or T-AUD-AMP amplifier |
| Wireless screen share | Built in — Windows / macOS / Android / iOS, no dongle required |
| Built-in software | Whiteboard, screen casting, annotation, side-swipe quick menu |
| Custom boot logo | Supported (OEM) |
| Dual-system switching | Touch frame switches seamlessly between Android and Windows |
| Front ports | PC-USB ×1, full-channel shared USB ×1, HDMI In ×1, Touch USB ×1, USB Type-C ×1 |
|---|---|
| Rear inputs | RJ-45 ×1, HDMI ×2, USB 3.0 ×1, USB 2.0 ×1, RS-232 ×1, AV ×1, VGA ×1 |
| Rear outputs | Headphone / line-out ×1, Touch ×1, AV ×1, Coaxial (S/PDIF) ×1, HDMI Out ×1 |
| Network — wired | RJ-45 Ethernet (LAN) |
| Network — wireless | Built-in Wi-Fi |
| Display output | HDMI |
| OPS slot | International-standard OPS slot (plug-and-play, cable-free) |
| Power consumption (max) | ≈784 W |
|---|---|
| Standby power | ≤0.5 W |
| Voltage range | 110–240 V / 50–60 Hz |
| Power connector | 3-pin (C5 "cloverleaf"), fixed |
| Mounting | Wall mount (included) |
| VESA / mount hole spacing | 1000 × 800 mm |
| In-wall (recessed) dimensions | 2500.8 × 1479.7 × 105.3 mm |
| Recess clearance rule | Add 20 mm per side |
| Operating environment | −10°C to 55°C · 10%–90% RH |
| Storage environment | −20°C to 60°C · 10%–90% RH |
| Frame | Sandblasted anodised aluminium, steel rear cover, passive cooling |
| Certifications | CE · FCC · RoHS |
| Warranty | 2 years from shipment date |
| Box contents | Stylus, remote control, 1.5 m power cable, wall mount, warranty card, certificate, manual |
The optional T-CPU OPS module slides into the OPS slot to add Windows alongside Android — no external cables, fully serviceable.
| T-CPU-i5 | Intel Core i5 · 8 GB or 16 GB DDR4 · 256 GB or 512 GB SSD · Windows 10/11 |
|---|---|
| T-CPU-i7 | Intel Core i7 · 16 GB DDR4 · 512 GB SSD · Windows 10/11 |
| Installation | Plug-and-play via standard OPS slot |
| System switching | Touch switches seamlessly between Windows and Android |
Complete the deployment
Part of a complete solution
The T-IFP-110 is a building block, not a standalone product. We design and supply the full AV solution; your team handles local installation. Explore where this 110-inch panel fits.
Smart Classroom Solution
Lecture theatres and large advanced classrooms — interactive teaching, device management and recording, configured by level for system integrators.
Explore Smart Classroom →Video Conference Room Solution
Large boardrooms and town-hall rooms — the built-in 48 MP camera and 8-mic array make this panel a single-product conferencing front-of-room for Zoom and Teams.
Explore Conference Room →Frequently asked questions
What size room is a 110 inch interactive flat panel best for?
A 110-inch interactive flat panel suits the largest rooms in a deployment — lecture halls, auditoriums, multipurpose halls and large boardrooms, typically seating 80 or more people. The T-IFP-110 has a 2435.4 × 1369.5 mm active area, so content stays readable from the very back of a deep room.
Does a 110 inch interactive flat panel come with a built-in camera and microphone?
Yes. The T-IFP-110 includes a built-in 48 MP camera and an 8-array microphone as standard. In most large rooms this removes the need for a separate conference camera (T-VID-CAM), so the panel works as a single-product conferencing front-of-room out of the box.
Does a 110 inch interactive flat panel run both Windows and Android?
Yes. The T-IFP-110 ships with Android 14 built in. To add Windows, slide a T-CPU-i5 or i7 OPS module into the OPS slot — the panel then runs Windows 10/11 alongside Android, and touch switches seamlessly between the two systems.
What touch technology does a 110 inch interactive display use?
The T-IFP-110 uses 20-point infrared touch with ≤1 mm accuracy. It is driver-free (plug and play) and responds to a finger, stylus or any non-transparent object 2 mm or larger.
Can I order a 110 inch interactive flat panel under my own brand (OEM)?
Yes. The T-IFP-110 is available for OEM customisation — your logo, boot screen, launcher and pre-installed software — from a minimum of 10 units. It is CE, FCC and RoHS certified, and a sample ships within 3 business days.
What audio output does a 110 inch interactive flat panel provide?
The T-IFP-110 has built-in 2 × 15 W front speakers for background and preview use, plus a line-level audio output. For a room this size, connect the line-level output to a Tralltech active speaker (T-AUD-ACT), or use an amplifier and passive speakers (T-AUD-AMP) in an auditorium — never wire it to a passive speaker directly.
Start with a sample. No commitment required.
Request full specifications, integrator pricing, or a sample of the T-IFP-110 — shipped within 3 business days. We respond within 24 hours.